00%

LOADING . . .

Home > Products

Products

PRODUCT INFO

Module Mounting Structure

Remote Monitoring System

Control Panel

Portable Solar Irrigation Pumpset

Pump Canopy

Solar Trolley

The framework of a solar power plant that supports the PV modules

Fixed Type

Fixed Type

Structure will be made by MS Channel, Angle View Details

Fully prefabricated and assemble with GI fasteners

All members are 86 microns hot dipped galvanized. Minimum height of the panel from GL mounted is 1.5 meter

The PV mounting structure is supported by ten numbers of vertical legs. The member can be as long as 3 metres.

Easy to mobilize to any remote site

Faster installation and low maintenance

Dual Axis Manual Tracker

Dual Axis Manual Tracker

68% more Efficiency fixed structure

Daily tracking over East to West up to 45 degree movement each side - by simply pulling chain as string - Hassel free Operation

Self-Locking of Rotating part while release at any daily tracking position - dual mechanical auto Locks

Design optimized to avoid Single Point Failure View Details

Easy Rotating Mechanism for user View Details

Optimized design for Civil Foundation View Details

Cloud-based remote monitoring system makes thing more intelligent

Connectora - Intelligent pump management

Connectora - Intelligent pump management

Measure important data of the pumping system which will be available to user side remotely

Data available in local display

Water flow meter input as Digital Pulse or 4-20 mA Analog Interface

VFD or Energy Meter in DOL starter can be interfaced on Modbus RS485 protocol to obtain information like Voltage, current, operating

SMS notification upto 5 mobile numbers

Door open alert in case of unauthorized access

SPD trip in case of lightening

Additionally 4-20 mA and 0-10 V input are available to interface any sensor to measure physical parameters

In Off-grid Solar System: 12 VDC source to this device can be obtained from PV array (up to 800 VDC) with a specially designed power supply

Power Conditioning Unit 1kW-20 kW

Power Conditioning Unit 1kW-20 kW

IP54 CPRI tested double door VFD enclosure View Details

Global standard quality controlled imported module

Galvanized mounting plate with a thickness of 2.5 mm thick

VFD module with in-built EMC filter

Z-bending would be employed in the construction of the box to drain water, preventing moisture from building up against the seal

Protections

  • Dry run of motor pump set
  • Open circuit / Phase mismatch
  • Over current
  • Under voltage
  • Reverse polarity
  • Output phase loss
  • PU gasket of a mixture of Polyol & Isocyanate between enclosure body and doors

    Padlock at outside door and Insert lock at the inside door to protect unauthorized access

    Triple surface treatment painting
    1st Phase: Nano-ceramic coating: A pre-treatment procedure for spray painting coat-priming-the nano-ceramic coating. Should have corrosion protection After 168 hours of salt spray testing to DIN ISO 7253
    2nd Phase: Electrophoretic spray painting coat-priming: Water-based polyester resins free from heavy metals, chromate, and silicone, Finish- RAL 7035. Even layer formation on all surfaces, edges and in cavities, complete cavity sealing, Coat thickness approx. 20 µm DIN ISO 7253
    3rd phase: Textured powder-coating: Electrostatic, environment-friendly powder coating based on polyester resin free from heavy metals, chromate, and silicone, with a high level of mechanical resistance. Standard color RAL 7035 Good resistance to chemicals, temperature, and weather. Decontamination should be done, Coating thickness approx. 80 µm

    We offer a variety of portable solar pumping system starting for 0.25 HP to up to 2 HP

    Portable Solar Irrigation Pump - SF2

    Portable Solar Irrigation Pump - SF2

    The SF2 is a robust surface pump designed for smallholder farmers with shallow water sources, it can pump up to 1 liter per second of water using just the power of the sun

    20000 LPD at 14 Meter Head View Details

    Robust, and farmer-fixable (as simple as a bicycle)

    Pumps enough to irrigate up to two acres

    Ideal with tanks, sprinklers, hoses or drip systems

    Removable, folding PV panels reduce theft risk

    Supplied with 3 x 50 Wp panels

    Solar panel tilting system for best performance

    No damage caused by dry pumping

    Tolerant of grit, sand, mud and debris

    5V USB charging socket for mobile phones and small electrical items

    No fuel or electricity costs

    Portable Solar Irrigation Pump - SE1

    Portable Solar Irrigation Pump - SE1

    The SE1 is a robust surface pump designed for smallholder farmers with shallow water sources, it can pump up to 0.5 liters per second of water using just the power of the sun

    10000 LPD at 14 Meter Head View Details

    Robust, and farmer-fixable (as simple as a bicycle)

    Pumps enough to irrigate up to One acres

    Removable, folding PV panels reduces theft risk

    Supplied with 1 X 60 Wp panels

    Solar panel tilting system for best performance

    No damage caused by dry pumping

    Tolerant of grit, sand, mud and debris

    5V USB charging socket for mobile phones and small electrical items

    No fuel or electricity costs

    Portable Solar Irrigation Pump - SF2H

    Portable Solar Irrigation Pump - SF2H

    The Futurepump SF2H is a robust surface pump designed for smallholder farmers with shallow water sources and high heads, it can pump up to 0.4-liter per second of water at a 15m lift using just the power of the sun

    MNRE Approved at Solar "Micro" Pumping Model III

    750 Liter/Hour at 30 meter Head View Details

    Robust, and farmer-fixable (as simple as a bicycle)

    Suitable for Nursery, Polyhouse, micro-sprinkler application

    Supplied with 100 X 3 Wp panels or 100 Wp X 2 Nos.

    Solar panel tilting system for best performance

    No damage caused by dry pumping

    Tolerant of grit, sand, mud and debris

    5V USB charging socket for mobile phones and small electrical items

    No fuel or electricity costs

    Extra protection to the Surface Pumpset

    Pump Canopy for Surface Mounted Pumpset

    Pump Canopy for Surface Mounted Pumpset

    Surface Pump-Motor Set is placed inside a Pump Canopy. Can be easily Installed in an Hour

    Canopy is painted with Pure Polyester powder coating

    Lower portion is hot-dipped galvanized for rust protection

    Pad lock on the front door & assembled with Anti-theft fasteners

    Lover for air circulation

    Easily detachable from the GI base in event of a flood

    Moveable Solar Trolley

    Design 1

    Design 1

    Portable Trolley is designed to mobilize 3 Solar Panel easily

    Design with sufficient space for the pump as well at the bottom of solar panel

    Completely powder coated for outdoor use

    Single farmer can mobilize the whole trolley easily

    Easy Insulation and no maintenance required, comes with 5 years of Warranty

    Design 2

    Design 2

    Portable Solar Trolley is designed to mobilize 4 Solar Panel easily

    Painted with Pure Polyester powder coating suitable for outdoor use

    Simple to use and maintain

    Close